Shanghai Jibang Electronic Technology Co., Ltd.
Shanghai Jibang Electronic Technology Co., Ltd. The Professional Supplier of LED Dimmer Controller
Add to Cart
Single Channel Digital Display DMX Signal Splitter & Address Dispenser RE2502
Summerize:
RE2502 is a digital display DMX512 address dispenser with function of digital lighting control signal amplification and distribution output. Each input/output interface adopts high voltage isolation technology, applied to DMX512 signal via remote transmission attenuation after the plastic amplification processing, as well as various distribution output interface, between input interface and the distribution between output interface to complete electrical isolation use occasion.
As a result of each interface between independent isolation, and it can be avoided by controlling circuit, scanner, silicon box problems and burned precision digital light console, to ensure the safe operation of digital light console, at the same time also guarantee DMX signal can normal transfer to all kinds of lighting equipment, so as to improve the whole digital lighting control system reliability.
Features:
1), DMX address dispenser with signal amplification, single channel distribution output.
2), Each input/output interface adopts high voltage isolation technology.
3), Matching all kinds of lighting equipment.
4), Signal types: DMX512, and the RS-485 interface of various digital signal transmission.
5), Signals connected socket: input RJ45.
6), Output 3 PIN screw terminals.
7), Input to output, output to output electrical isolation pressure: > 1000V.
Specifictions:
|
Input Voltage: 12-24VDC |
Channel: 1CH In & 1CH Out |
|
Input Signal: DMX512 |
Output Signal: DMX512 |
|
Segregation Voltage: > 1000 V |
Power Consumption: <1.5W |
|
Protection Grade: IP40 |
Input/Output Socket: RJ45/Screw Terminal |
|
Gross Weight: 450g |
Product Size: L160*W90*H30mm |
Product Size:
Tech-Parameters of DMX Signal Splitter Series:
|
Model No. |
Input Signal |
Channels |
Input Voltage |
Connect Socket |
Special Function |
|
RE2000 |
DMX512/1990 |
1CH in/2CH out |
AC100-265V |
RJ45/Press terminal |
|
|
RE2501 |
DMX512/1990 |
1CH in/1CH out |
DC12-24V |
RJ45/Press Terminal |
|
|
RE2502 |
DMX512/1990 |
1CH in/1CH out |
DC12-24V |
RJ45/Press Terminal |
DMX Address Dispenser by Digital Tube |
|
RE2504H |
DMX512/1990 |
1CH in/4CH out |
AC90-250V |
RJ45/Press Terminal |
|
|
RE2508H |
DMX512/1990 |
1CH in/8CH out |
AC90-250V |
RJ45/Press Terminal |
|
|
RE2509H |
DMX512/1990 |
8CH in/8CH out |
AC90-250V |
RJ45/Press Terminal |
|
Function Instructions:
(Left Side): The DMX signal input: RJ45 network interface, the correct connection is on panel..
(Right Side): 2 PIN press button terminals for is DC power input. The other 3 PIN press button terminals is for DMX output. " NC " means no connection on the terminals.
Product Wiring Diagram:
DMX512 Control Signal Connection:
1. DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity.DMX512 controller output signal positive, signal negative, signal ground with DE8008 input interface corresponding connection.
2. DMX5000 output and DE8008's transmission lines can't be over 300 meters.
3. DMX5000 each interface can with not more than 170 DE8008. Eight output interface. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite contact the DMX lights.
4. When contacting 32 DE8008, DMX signal must add a signal amplifier RE2502. Cascade can't more than 4 PCS.