Shanghai Jibang Electronic Technology Co., Ltd.
Shanghai Jibang Electronic Technology Co., Ltd. The Professional Supplier of LED Dimmer Controller
Add to Cart
Shanghai JIBANG DC15-30V 4CH DMX to 0-10V Dimming Signal Converter RT2104
1), DMX512 standard signal input and 0/1-10V output.
2), Automatically adapts input voltage DC15-30V.
3), 4 isolate output channels, to output 0-10V signal.
4), Setting the DMX address freely with Dipswitch.
5), Signals connected socket: RJ45 interface input and screw terminal output.
6), Custom-made is available and 3 years warranty.
Tech-parameter:
Input Voltage: DC15-30V
Channel: 4 channels
Input Signal: DMX
Output Signal: 0/1-10V
DMX Socket: RJ45 interface
0-10V Socket: Screw terminal
Segregation Voltage: > 1000 V
Power Consumption: <1.5W
Output Signal Current: Max 20A*4CH
Protection Grade: IP40
Gross Weight: 220g
Product Size: L160*W47*H24(mm)
Specifications of LED Dimming Signal Converter Series:
| Model NO. |
Input Signal |
Input Voltage | Channels | Output Signal | Input Socket | Output Socket |
| RT2101 | DMX512 | DC15-30V | 1CH | 0/1-10V | Press Button | Press Button |
| RT2102 | DMX512 | DC15-30V | 2CH | 0/1-10V | Press Button | Press Button |
| RT2103 | DMX512 | DC15-30V | 3CH | 0/1-10V | Press Button | Press Button |
| RT2104 | DMX512 | DC15-30V | 4CH | 0/1-10V | RJ45 Interface | Screw Terminal |
| DM9150-1CH | DALI | DC12-24V | 1CH | 0/1-10V | Press Button | Press Button |
| DM9150-2CH | DALI | DC12-24V | 2CH | 0/1-10V | Press Button | Press Button |
| DM9150-3CH | DALI | DC12-24V | 3CH | 0/1-10V | Press Button | Press Button |
Product Instructions:
1),The driving output interface, with Common V- and CH1+, CH+, CH+, CH+ output for 4channels 0-10V signal option.
2), Set DMX address with Dipswitch. You can set the DMX address code according to the DMX Address Encoding Table.
Wiring Diagram:
Attontions about DMX System Wiring:
1, DMX signal cable is shielded twisted pair cable(microphone cable) or three core cable, DMX signal positive, negative in the end, solder or crimp DMX signal cable plug should be paid special attention to the polarity.The input interface and corresponding signal output from the DMX512 controller, signal is negative, and the connection of DE8036 signal.
2, The DMX5000 output and DE8035 transmission line can't exceed 300 meters.
3, DMX5000 and DE8036 wiring, lighting by JBLED FLASH software can realize the control
and computer on-line,realize unlimited expansion cascade with DMX lamp.
4, Every connected 32 DE8036control, DMX signal must be combined with a signal amplier
(such as: RE2000),cascade cannot be more than 4PCS.
5, At the end of the line, shall be connected to a DMX signal termination (DE8036 dial switch
tenth dial can)