Shanghai Jibang Electronic Technology Co., Ltd.
Shanghai Jibang Electronic Technology Co., Ltd. The Professional Supplier of LED Dimmer Controller
Add to Cart
Mini Size Max 5A*1CH Constant Voltage 0-10V Dimming Driver DM9135
SUMIRIZE:
This series is 0/1-10V dimmable drivers for LED strio and other constant voltage of constant current LED lights, we can offer not only DC input but also AC input products. No flicker on low brightness. We use logarithmic brightness curve to get smooth and good sense for eyes. They all compatible with products of Lutron, Dynalite, Clipsal, LDS, Osram, , ABB, Schneider, Levition, JUNG, Berker, Be Lichregler etc.
1, Single channel constant voltage output, Max 5A per channel.
2, Support active and passive dimmer switch to use, also can work with the large control system structure to dim.
3, No flicker and 0 ~ 100% dimming.
4, When the power turn off,it has memory function.
5, With the self-test function, support short circuit , over current and over heating protections.
6, Custom-made is available and 3 years warranty.
Tech-parameter:
| Model No.: DM9135 | Control Channels: 1CH | Signal Input: 0/1-10V signal |
| Input Voltage: DC12-24V | Max Current Load: Max 5A | Signal Output: Constant Voltage PWM |
| Max Output Power: 120W | Frequency: 500Hz | Protection Grade: IP40 |
| Light Gray Level: 256 | Gross Weight: 125g | Product Size: L90*W47*H22(mm) |
Product Size
Specifications of 0/1-10V LED Dimmable Driver Series:
| Constant Voltage 0/1-10V LED Dimmable Driver Series | ||||||
| Model No. | Input Signal | Input Voltage | Frequence | Max Current Load | Max Output Power | Output Voltage |
| DM9100 | 0/1-10V | DC12-24V | 500Hz | 10A*1CH | 120W(12V)/240W(24V) | DC12-24V |
| DM9103 | 0/1-10V& Switch Dim | DC12-24V | 500Hz | 10A*1CH | 120W(12V)/240W(24V) | DC12-24V |
| DM9135 | 0/1-10V | DC12-24V | 500Hz | 5A*1CH | 144W(12V)/288W(24V) | DC12-24V |
| DM9138 | 0/1-10V | DC12-24V | 500Hz | 6A*3CH | 144W(12V)/288W(24V) | Dc12-24V |
| DM9132H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 1.5A | 18W | DC12V |
| DM9132H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 0.8A | 18W | DC24V |
| DM9130H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 3A | 35W | DC12V |
| DM9130H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 1.5A | 35W | DC24V |
| DM9129H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 4.2A | 50W | DC12V |
| DM9129H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 2.1A | 50W | DC24V |
| DM9123H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 6A | 75W | DC12V |
| DM9123H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 3A | 75W | DC24V |
| DM9120H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 8.4A | 100W | DC12V |
| DM9120H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 4.2A | 100W | DC24V |
| DM9119H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 12.5A | 150W | DC12V |
| DM9119H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 6.3A | 150W | DC24V |
| DM9118H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 16.7A | 200W | DC12V |
| DM9118H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 8.3A | 200W | DC24V |
| DM9103H-V12 | 0/1-10V | AC100-240V | 50-60Hz | 29A | 350W | DC12V |
| DM9103H-V24 | 0/1-10V | AC100-240V | 50-60Hz | 14.5A | 350W | DC24V |
| Constant Current 0/1-10V LED Dimmable Driver Series | ||||||
| DM9101 | 0/1-10V | DC12-48V | 500Hz | 350mA*1CH | 16W | DC12-48V |
| DM9102 | 0/1-10V | DC12-48V | 500Hz | 700mA*1CH | 32W | DC12-48V |
| DM9132H-VA18 | 0/1-10V | AC100-240V | 50-60Hz | 350mA*1CH 700mA*1CH | 18W | DC5-52V DC5-26V |
| DM9130H-VA35 | 0/1-10V | AC100-240V | 50-60Hz | 700mA*1CH 1000mA*1CH | 35W | DC5-50V DC5-36V |
| DM9129H-VA50 | 0/1-10V | AC100-240V | 50-60Hz | 1.2A*1CH 1.5A*1CH | 50W | DC5-42V DC5-26V |
Function Instructions:
1), According to the product connection diagram,active 0/1-10V voltage regulator,or passive 1-10V dimmer, LED load, power by positive and negative to connect to the right port, open the power supply, adjust the 0/1-10V voltage regulator, so as to change the output of the controller, until get the satisfactory of LED output brightness.
2), When the 【 Analog IN 】 port breaking, controller all light output, When the【Analog IN 】 port two terminals short circuit, the output shut down.
0/1-10V System Connection Notes:
1. Please choose regulating curve smooth 0/1-10 V dimmer, otherwise it may directly affect the LED dimming smoothness.
2. Load LED's voltage and the controller of power supply voltage must be consistent, and must be in the product prescribed voltage input range.
3. 0/1-10V Active and Passive dim signal input can get 0-100% brightness output and the dimming curved path is proportional to the dim signal.
Product Wiring Diagram:
0/1-10V Dimming System Wiring Diagram: